Adjust the Pitch (Transpose Value):
The pitch, or Transpose value, of the selected
GeniSys
TM
voice may also be adjusted separately from
the other available GeniSys
TM
voice stop positions as
well as the main organ stops.
To adjust the Pitch, touch the PITCH button to
highlight it. Then, use the UP and DOWN arrows to
increase or decrease the value. Touch the BACK
button to return to the voice editing screen or the
HOME button to return to the
Home
screen.
Note:
The pitch can be adjusted either ±12 steps. A value of 12 is a full octave higher, while
a value of -12 is a full octave lower.
Adjust Velocity:
The Velocity response of the selected GeniSys
TM
voice may also be adjusted separately from the other
available GeniSys
TM
voice stop positions. Non-
velocity keyboards transmit a fixed velocity value of
64. The Velocity parameter allows keyboards without
velocity sensitivity to key the voice with a harder or
lighter touch as some sounds can produce a different
timbre based on touch. The Velocity parameter allows
the standard fixed value to be changed to a different fixed
value.
Two Velocity settings are available: Normal and Fixed.
Normal
= Velocity sensitivity is enabled. The GeniSys
TM
voice will respond to keyboard
velocity.
Fixed
= Velocity sensitivity is disabled. The GeniSys
TM
voice will respond to the
predetermined set velocity value displayed.
To adjust the Velocity response, touch the VELOCITY button. The setting will “toggle”
between Normal and Fixed. When Fixed is displayed, an additional button will appear and
display a “fixed” velocity value. To change the fixed velocity value, touch the “fixed” value
button to highlight it and then use the UP and DOWN arrows to increase or decrease the
value. Touch the BACK button to return to the voice editing screen or the HOME button to
return to the
Home
screen.
Note:
Any value of between 1 and 127 may be selected.
Adjust the Note “Range”:
The Note Range settings allows the ability to set note/key limits on the selected GeniSys
TM
Voice. Note Range is the ideal tool to “split” the keyboard utilizing the two separate
GeniSys
TM
voices within a single division. There are two Note Range values; one for the
LOW note and one for the HIGH note.
Note:
The standard values of “C-2” for the LOW note value and G8 for the HIGH note value
allow the selected GeniSys
TM
Voice to play over the entire keyboard's note range.
7