manualshive.com logo in svg

Allen-Bradley Stratix 5900 Services, User Manual

Share
Download
Allen-Bradley Stratix 5900 Services User Manual Download Page 23

Rockwell Automation Publication 1783-UM005A-EN-P - September 2013

23

Install Stratix 5900 Services Router

Chapter 2

Apply Power

 

The router comes with a retention lock plug and the power supply. Follow these 
instructions to apply power.

1.

Attach the locking connector to the power cord.

2.

Plug the adapter (with the power cord attached) into the router.

3.

Plug the power cord into the outlet.

IMPORTANT

This product relies on the building’s installation for short-circuit (overcurrent) 
protection. Be sure that the protective device is rated not greater than: 120 V 
AC, 20 A U.S (240 V AC, 16…20 A international).

This product requires short-circuit (overcurrent) protection, to be provided as 
part of the building installation. Install only in accordance with national and 
local wiring regulations.

IMPORTANT

The device is designed to work with TN power systems.

ATTENTION: 

This product is to be connected to a Listed or certified class 2 

output/IEC 60950-1 compliant limited power source, rated 5 V DC, 4 A max.

32382-M

32383-M

Locking Connector Assembled

Summary of Contents for Stratix 5900 Services

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands