Rockwell Automation Publication 1783-UM005A-EN-P - September 2013
11
Getting Started
Chapter 1
Status Indicators
This table describes the status indicators for the Stratix 5900 services router.
Serial Port
The High Speed Smart Serial 12-in-1 connector provides high flexibility of the
connections to DTE/DCE devices. The 12-in-1 serial interface pins connect to
the Field Programmable Gate Array (FPGA). The FPGA configures the pin
directions based on the cable type you use.
Table 3 - Stratix 5900 Services Router Status Indicators
Status Indicator
Color
Description
SYS
Yellow
FPGA download is complete.
Green (blinking)
ROMMON is operational.
Green (solid)
IOS is operational.
Green (four blinks during bootup)
Reset has been pushed during the bootup.
Off
After applying power, when FPGA is being downloaded
(in ROMMON).
ACT check
Green
Network activity on FE Switch ports, GE WAN port, and
serial interfaces.
Off
No network activity.
WWAN check
Green
Module is powered on and connected but not
transmitting or receiving.
Green (slow blinking)
Module is powered and searching for connection.
Green (fast blinking)
Module is transmitting or receiving.
Off
Module is not powered.
Off/Off
No SIM present in either slots.
