6
SLC 5/03™, SLC 5/04™, and SLC 5/05™ Modular Processors
Publication 1747-IN009C-MU-P - December 2002
Required Tools and Equipment
•
medium blade screwdriver
•
programming equipment
•
1747-CP3 cable or appropriate network interface
Safety Considerations
For general recommendations concerning installation safety requirements and safety related
work practices, refer to the requirements specific to your region.
•
Europe
: Reference the standards found in EN 60204 and your national regulations.
•
United States
: refer to NFPA 70E,
Electrical Safety Requirements for Employee Workplaces.
Network Interface
SLC 5/03
SLC 5/04
SLC 5/05
1747-PIC
X
1747-CP3
X
X
X
1747-KTX, -PKTX
X
(1)
(1)
requires 1784-CP14 cable
X
(3)
(3)
requires 1784-CP13 cable
1747-PCMK
X
(2)
(2)
requires 1784-PCM4 cable
X
(4)
(4)
requires 1784-PCM6 cable
10Base-T EtherNet
X
ATTENTION
!
Never install, remove, or wire any module while power is applied.
Also, do not expose processor modules to surfaces or other areas that
may typically hold an electrostatic charge. Electrostatic charges can
alter or destroy memory.
IMPORTANT
See page 13 for information on proper battery handling, storage, and
transporting.
