Rockwell Automation Publication 1769-UM022C-EN-P - June 2018
49
Complete the Controller Setup
Chapter 3
Before the firmware upgrade begins, you see the following dialog box.
Take the required action for your application. In this example, the
upgrade continues when OK is clicked.
After the controller is updated, the status dialog box displays that the
update is complete.
9. Click OK.
10. To close the ControlFLASH software, click Cancel and click Yes.
Use the AutoFlash Utility to Load Firmware
You can use the AutoFlash utility to load firmware through a USB or EtherNet/
IP network connection.
Let the upgrade complete without interruption. If you interrupt a firmware
upgrade that is in process, you are alerted that an error has occurred. In this
case, cycle power to the controller. The firmware revision level reverts to the
1.
xxx
revision level and you can begin the upgrade process again.