4
ArmorBlock MaXum 8 Input / 8 Output Module
Publication 1792D-5.20 - October 1998
Install the Module
This module mounts to the following cable bases:
• 1792D-CBFM for KwikLink flat media installation
• 1792D-CB12 for 12mm drop cable installation
• 1792D-CB18P for round media DeviceNet and output power
• or other optional cable base assembly.
Important: The cable base should already be installed. See publication
1792D-5.9 to install the cable base.
To install the module:
Important: Proper alignment of the screws is necessary to complete the
connections between the module contacts and the cable
contacts.
1.
Position the module over the mounted cable base. Align the three cap-
tive screws in the module with the accepting receptacles in the base.
2.
Tighten the screws with a torque of 8 inch-pounds to secure the mod-
ule to the base.
Note: Dimensions change according to the cable base and module
combination used.
Align the
screws to
properly
assemble
the module
to the base.
Cable Base 1792D-CBFM is
used for this example.
Assembled
dimensions
in (mm)
1.9(48.18)
2.7 (68.5)
6.85 (174mm)
41522
