42
Rockwell Automation Publication 6181X-UM001C-EN-P - July 2015
Chapter 4
Component Replacement
Install a Card in the Bottom CF Card Slo
t
Follow these steps to install a CF card in the bottom CF card slot.
1.
Loosen the screw that secures the CF card slot cover
(
A
)
.
2.
Open the CF card slot cover
(
B
)
.
If necessary, remove an inserted card by pushing the button on the hinge
side.
3.
Insert the new CF card into the slot until it is firmly seated
(
C
)
.
4.
Close the CF card slot cover (D).
5.
Tighten the CF card slot cover screw
(
E
)
.
WARNING:
The CF card slot on the bottom side of all computer models is
hot-swappable but only in a nonhazardous location. You can insert or
remove a card from this slot while the computer is running.
When the computer is used in a hazardous location, do not insert or remove a
card in the bottom CF card slot unless power has been switched off.
ATTENTION:
When properly seated, more than 80% of the CF card easily
inserts into the slot before you encounter resistance. If you encounter
resistance sooner, then remove the card, rotate it 180°, and reinsert.
Do not force the card into the slot or you can damage the connector pins.
C
E
A
B
D
Summary of Contents for 6181X-12TPW7DC
Page 4: ...4 Rockwell Automation Publication 6181X UM001C EN P July 2015 Summary of Changes Notes...
Page 8: ...8 Rockwell Automation Publication 6181X UM001C EN P July 2015 Table of Contents Notes...
Page 34: ...34 Rockwell Automation Publication 6181X UM001C EN P July 2015 Chapter 3 Operation Notes...
Page 67: ......
