4
Rockwell Automation Publication VIEW-IN002C-EN-P - October 2018
Adapter Kit for PanelView 5000 and PanelView Plus 7 Performance Terminals
Remove the Existing Terminal From the Panel
Follow these steps to remove the existing terminal from the panel.
1.
Remove all power from the enclosure and the terminal.
2.
Disconnect all communication cables from the terminal.
3.
While holding the terminal, remove the mounting clamps that secure the terminal in the
panel.
4.
Remove the terminal from the panel.
Drill the Holes for the Adapter Kit
Follow these steps to drill the holes for the adapter kit by using the drill template included in this
kit.
1.
Clean the panel where the drill template will be taped over the existing cutout.
2.
Determine which side of the drill template that you need.
ATTENTION:
Remove all power from the components in the enclosure and the existing terminal.
Disconnect the communication cables from the terminal.
Failure to remove all power and disconnect communication cables can cause electric shock and
unexpected communication signals to the machinery.
ATTENTION:
Be careful when removing the mounting clamps. The terminals can fall out of the
panel after the mounting clamps have been removed. Be sure to hold the terminal in the panel
while you remove the mounting clamps, and then carefully remove the terminal from the panel.
Drill Template for PanelView™ 5000 and PanelView Plus 7 Performance
JO
Terminals Adapter Kit
For Adapter Kit 2711P-RAAK7
Drill Template for PanelView 5000 and PanelView Plus 7 Performance Terminals
6.5-in. Keypad with Touch Screen Adapter Kit
Replaces these Existing Terminals:
PanelView Plus 6 700 Keypad, or Keypad with Touch Screen
PanelView Standard 600 Keypad, or Keypad with Touch Screen
Printed Actual Size (scale = 1:1)
If you print this drill template from the PDF file, set the paper size on your plotter or printer to 18 x 12 inches.
For dimensions, see the Adapter Kit for PanelView 5000 and PanelView Plus 7 Performance Terminals
Installation Instructions, publication
VIEW-IN002
, which is shipped with this drill template.
Identifies the new terminals
that can be installed with
this drill template.
Identifies the existing
terminals that can be
replaced with this drill
template.
