manualshive.com logo in svg

Allen-Bradley 1757-FFLD2, User Manual

Share
Download
Allen-Bradley 1757-FFLD2 User Manual Download Page 72

72

Rockwell Automation Publication 1757-UM012A-EN-P - July 2011

Chapter 4

        RSFieldbus Communication

Export Tags

A file with all the device and function block tags must be created to enable online 
OPC communication with RSFieldbus software and third-party OPC clients. 
Each time that you edit or add a device or block, the Export Tags procedure must 
be repeated. Otherwise, supervision of the modified tag is not allowed.

1.

In the Project window, right-click a project icon and choose Export Tags.

The Export Tag message window appears.

2.

Click OK.

Consolidate the OPC Database

If your system has a centralized OPC server and you are using multiple projects at 
the same time, you must consolidate the project tags for each project. This 
process prevents exported tag information in the HseTagInfo.ini file from being 
overwritten when tags are exported in the next project.

1.

In the Project window, right-click a project icon and choose Consolidate 
OPC Database.

IMPORTANT

Tags must be exported from at least one project before you can open the 
Consolidate OPC Database dialog box.

Summary of Contents for 1757-FFLD2

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands