POINT I/O Dual Port EtherNet/IP Adapter
11
Publication 1734-IN041F-EN-P - May 2019
Valid settings range from
001…254
. When you use the thumbwheel to assign an address
and set it to
001
, the adapter gateway address is set to
0.0.0.0
. and the subnet mask is
255.255.255.0
. When you use the thumbwheel to assign an address and set it between
002...254
, the adapter gateway address is set to
192.168.1.1
.
The adapter does not have a host name assigned, or use any Domain Name System when
using the thumbwheel settings.
Network Address Thumbwheel
If you set the switches to an invalid number (for example, 000 or a value greater than 254
excluding 888), the adapter checks to see if you enabled DHCP.
Refer to POINT I/O and ArmorPOINT I/O Dual Port EtherNet/IP Adapter User
Manual, publication
for more information on configuration settings.
DHCP State
Adapter Action
Enabled
Asks for an address from a DHCP server. The DHCP server also assigns other
Transport Control Protocol (TCP) parameters.
Not enabled
Uses the IP address (along with other TCP configurable parameters) stored in
nonvolatile memory.
0 2
0
1734-AENTR
Module
Status
Network
Activity
Network
Status
Point Bus
Status
System
Power
Field
Power
POINT I O
Link 1
Activity/
Status
SS
44848
Network node address
pen push thumbwheel –
Press the
center
of either
the + or - buttons to change
the number
