Allen-Bradley 1203-SSS, User Manual

Page: 19 / 44

Configuring the Serial Converter
3-7
Key Strokes for Terminal Emulation Software
Setting the DF1 Address
The DF1 address is the address that the converter is using on the serial
network. If you have multiple nodes on a serial network, each node
needs a unique DF1 address. The factory-default DF1 address is 1.
To set the DF-1 address
1. In the main menu ( Figure 3.6 ), press 1 to display the parameters.
2. Press
↑
or
↓
to scroll to P2 - [DF1 Address].
Figure 3.7 DF1 Address Parameter
3. Press
→
or
←
to scroll to the desired value, and then press Enter.
4. Reset the converter. Refer to Resetting the Converter in this chapter.
Key Description
0 – 9 In the main menu, keys 1 – 3 select a menu option.
In the parameter screen, keys 0– 9 enter a value.
Esc Display the main menu or abort changes to a parameter.
↑
or
↓
Scroll through parameters or events.
→
or
←
Scroll through the values for a parameter.
Enter Save a value for a parameter.
Press the UP ARROW or DOWN ARROW key to scroll
through the parameter list. Press the LEFT ARROW or
RIGHT ARROW key to modify parameter values. Press
the ENTER key to save a new value.
2> DF1 Address = 1
Allen-Bradley