ALLEN & HEATH XONE DX User Manual Download Page 58 | Manualshive

Page: 58 / 66

background image

Allen & Heath User Guide for XONE:DX with Serato ITCH 1.6 58

WHITELABEL AUDIO FILES

Whitelabel audio files are a unique file format (file extension wl.mp3) developed by Serato. They are spe-
cially prepared for use in ITCH, with files pre-analyzed, tagged with song and artist info, BPM and album
art where possible.

Whitelabel audio files play as high quality 320kbps stereo audio in ITCH with an ITCH controller at-
tached. Without an ITCH controller connected, or when playing these files through other mp3 software
and devices, they will play as low quality 32kbps mono audio.

Whitelabel audio files are promotional releases from record labels available to ITCH DJs for free from
Whitelabel.net.

WHITELABEL .NET

The Serato Whitelabel Delivery Network is a unique system that allows record labels to digitally deliver
promotional releases directly to DJs. To download Whitelabel audio files and to sign up to receive up-
dates on the latest promotional releases, visit http://www.whitelabel.net/.

Locked whitelabel .net Files

Due to some labels’ licensing requirements, certain whitelabel audio files will require email and password
verification to unlock them. If you have legitimately downloaded these tracks yourself, entering the
email and password you use for whitelabel.net will unlock the files for playback within ITCH. If you are
still having problems unlocking these files, please contact Serato support: www.serato.com/support.

SYSTEM REQUIREMENTS

Whitelabel.net is tested to work on these browsers:

Internet Explorer 6 and above (7 and above highly recommended)
Firefox 3 and above
Safari 3 and above

You will also need Flash installed and have Javascript enabled to be able to preview and download tracks.

NOTE: Running Whitelabel audio files through Mixed In Key can cause the files to only play at 32kps in
ITCH (even with an ITCH controller attached). At this time we advise you not to use Mixed In Key with
Whitelabel audio files.

«
...
56
57
58
59
60
...
»

Summary of Contents for XONE DX



































































Reviews:

No comments

Related manuals for XONE DX

Brand: Napoleon Pages: 2

Brand: Raytheon Pages: 62

Brand: Nektar Pages: 3

Brand: Youkey Pages: 86

Brand: Wacker Neuson Pages: 62

Brand: Zimmer Pages: 2

Brand: ZipRip Pages: 31

Brand: Masterclock Pages: 19

Brand: Strapack Pages: 16

Brand: Hameg Pages: 60

Brand: Hedson Pages: 32

Brand: JLG Pages: 165

Brand: Labconco Pages: 174

Quadra Force/Sys

Brand: American DJ Pages: 1

Brand: Sunrise Medical Pages: 9

Brand: Tektronix Pages: 54

Brand: obsta Pages: 37

Brand: ZAMST Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands