Allen & Heath
XONE:DB2 User Guide
33
AP8640_2
MAC DRIVER INSTALLATION
Checking the Driver Installation
Once the driver installation is complete, you will need to check that the XONE:DB2 is being
recognised. To do this, connect the XONE:DB2 to your Mac and then, from the file menu, select:
GO Utilities Audio MIDI Setup
The
Audio Devices
window will open automatically. To open the
MIDI Studio
window, from
the File Menu, select:
Window Show MIDI Window
In the
Audio Input
section, the
number of channels should be seen
as 8, running at 48kHz, 24 bit.
In the
Audio Output
section, the
number of channels should be seen
as 8, running at 48kHz, 24 bit.
Now select the
MIDI Devices
tab
and
make
sure
that
the
XONE:DB2 is seen as a MIDI
device as shown.
Summary of Contents for XONE:DB2
Page 1: ...Allen Heath XONE DB2 User Guide AP8640_2 USER GUIDE Publication AP8640_2 ...
Page 6: ...Allen Heath XONE DB2 User Guide 6 AP8640_2 PANEL DRAWINGS ...
Page 7: ...Allen Heath XONE DB2 User Guide 7 AP8640_2 APPLICATION DIAGRAM ...
Page 39: ...Allen Heath XONE DB2 User Guide 39 AP8640_2 NOTES ...
