Allen & Heath
XONE:DB2 User Guide
24
AP8640_2
This menu selects the routing options for the upstream
USB. Send 1 corresponds to USB 1-2, Send 2 to USB
3-4 etc. See page 24 for more information,
The options are:
CH1-4 Analog:
Routes the selected converted analogue input to the soundcard input.
CH1-2 Digital:
Routes the selected digital input to the soundcard input.
CH1-4 Post Fader:
Routes the selected post-fade channel audio to the soundcard input.
MIC Pre Lev:
Routes the pre level microphone signal to the soundcard input.
MIC Out:
Routes the post level microphone signal to the soundcard input.
Record:
Routes the record output to the soundcard input.
Booth:
Routes the booth output to the soundcard input.
Mix:
Routes the mix output to the soundcard input.
Phones:
Routes the headphone (CUE) signal to the soundcard input.
To view the Soundcard Input Block Diagram, please see Page 26.
MIXER RESET
Will force a hard reset of the mixer, returning all user options to the default factory setting.
USB ROUTING
ADVANCED SETUP MENU
ABOUT
The
ABOUT
screen displays the currently loaded Code
(Firmware Version) and Boot Loader (BL) version.
Periodically, firmware updates may become available for
your DB2.
Please check www.xone.co.uk/db2 regularly.
Updating Firmware
Check the Xone website for new firmware and, if available, follow the instructions to download it.
When installing firmware please ensure that:
1.
You close all audio and MIDI applications before commencing
2.
Your DB2 is connected to the USB port you normally use
3.
You do not power down the DB2 or disconnect the USB cable.
Please note: The firmware update can take anywhere between 3 and 5 minutes to complete.
Summary of Contents for XONE:DB2
Page 1: ...Allen Heath XONE DB2 User Guide AP8640_2 USER GUIDE Publication AP8640_2 ...
Page 6: ...Allen Heath XONE DB2 User Guide 6 AP8640_2 PANEL DRAWINGS ...
Page 7: ...Allen Heath XONE DB2 User Guide 7 AP8640_2 APPLICATION DIAGRAM ...
Page 39: ...Allen Heath XONE DB2 User Guide 39 AP8640_2 NOTES ...
