GLD
Chrome Edition
User Guide
11
AP9989 iss.1
GLD Chrome Mixer rear connectors
MIDI In/Out
Network
Ethernet
port for wireless
router, GLD Editor or
TCP/IP control.
Cooling fan. Do
not block this
opening.
Surface audio inputs
8 analogue inputs:
4 mic/line XLR (
skt 41-44
)
2 stereo RCA pairs (
skt 45-48
)
Any socket can be patched to any channel.
The default is one-to-one mapping of sockets
to channels.
dSNAKE link
This is the mixer link to the main
AR2412
or
AB168
AudioRack.
It carries audio inputs and
outputs including the sends to
the ME-1 personal monitoring
system.
Connect using a touring grade
Cat
5 cable up to 120m (396’)
long.
The
Lnk/Err
indicator flashes at
a steady rate when the link is
established.
4-pin XLR
Lamp
socket.
We recommend the use
of the Allen & Heath
LEDlamp with built-in
dimmer.
Mains power IEC
input socket and
On/Off switch.
Surface audio outputs
6 analogue and 4
digital outputs
4 XLR line out (
skt 21-24
)
1 stereo RCA pair (
skt 25/26
)
1 SPDIF 2 channel digital out (
skt 27/28
)
1 AES 2 channel digital out (
skt 29/30
)
Any GLD signal can be patched to any socket.
Power On
indicator
Ready
indicator
–
Lights yellow when
the output sockets
are ready to pass
audio after power up.
EXPANDER link
You can plug an
AR84
expander
in here.
The AR84 can be located near
the mixer to provide more local
I/O, on stage or at a remote
location.
Connect using a touring grade
Cat
5 cable up to 120m (396’)
long.
The
Lnk/Err
indicator flashes at
a steady rate when the link is
established.
I/O Port
See below
The
LOCK
indicator lights
when the audio is
sync locked
I/O Port options
for system linking, expansion, recording and audio networking using one of the option
cards available from Allen & Heath. 64 channel bi-directional 48kHz audio.
Dante
ACE
TM
MADI
EtherSound
Waves
MMO
GLD sockets can be patched using the
I/O
screen.
ADAT
iDR out
Aviom
TM
Hearback
