GR4 User Guide
15
AP10223 Issue_2
Analogue Remote Connection
The analogue inputs are 4-pole Euroblock
type connectors for Zone 1 & Zone 2 control.
These are 0-10V inputs and are typically used
as a variable resistance and stepped voltage
control for analogue volume control and
source selection.
Pin assignments are screen printed above the
connector or alternatively use the below wiring
diagrams.
Refer to 4.2 Control Section
④
for location details
4-Wire Analogue Remote
0 = 0V
L = Level
S = Source
+ = 10V
Analogue remote connection example.
