Allegion Schlage L-Series, Service Manual

Page: 214 / 232

214 • Schlage • L-Series service manual
L9000-Series 180 degree indicator installation instructions – sectional trim
L9000-Series 180 degree indicator installation
instructions – sectional trim
Indicator trim is available for either the inside or outside of the door on allowable functions.
Non-indicator trim is furnished on the opposite side of the door.
The L9000 lock with indicator is not intended for exterior door applications.
For retrofit, see page 8.
Check the door preparation dimensions with the template included in the package.
Inside cylinder indicator with outside cylinder
non-indicator sectional trim shown
OR
OR
Furnished on opposite side of
door, depending on function.
Thumb
turn
Cylinder Coin
turn
Non-indicator options:
Coin turn
Thumb turn
Emergency
turn
Indicator turn options:
L9000 Series Lock with Indicator Sectional Trim
Installation Instructions
L9000 Lock with Indicator
Tools
1
IMPORTANT! Check lock handing before installation
To change handing:
1. Pull out the latch
and rotate 180°.
2. Remove the lock
handing screw
from one side of
the chassis and
install it on the
opposite side.
The lock handing
screw should
always be on the
interior side of
he door.
Pull
Rotate
180°
Handing
screw
2
Prepare the door for indicator trim
Two
Z\,
" pilot holes are required to mount the indicator.
ONLY ONE SIDE OF THE DOOR – THE INDICATOR SIDE –
REQUIRES THIS PREPARATION. Use the template included in
the package to mark the location of the pilot holes before drilling.
Inside of door Outside of door
¹⁄₈
" pilot
hole x 2
¹⁄₈
" pilot
hole x 2