4 • AptiQ • MT20w Enrollment Reader User Guide
Overview
Overview
The aptiQ MT20w multi-technology enrollment reader is designed to
simplify the enrollment of proximity and smart credentials by using a
computer’s USB connection. The MT20w does not require software to
operate, and will function on any operating system.
The MT20w is an ISO14443 and ISO15963 contactless credential
reader, and is compatible with aptiQ smart credentials (MIFARE
Classic and MIFARE DESFire EV1), aptiQmobile credentials, PIV
credentials, and most proximity credentials up to 37-bits.
Connect the reader’s USB to your operating system. You will see a
series of green/red LED flashes and beeps:
z
z
2 green LED flashes.
z
z
1 red LED flash, followed by a beep.
z
z
3 red LED flashes, with each flash followed by a beep.
The LED will then turn red and stay on, indicating that the reader is
ready. If the LED and the beeper do not respond, check the cable
connections.
Put the cursor in the desired field to receive the output and present a
valid credential. You will see a series of green/red LED flashes, along
with a beep:
z
z
Red LED will flash to green, followed by a beep.
z
z
Green LED will flash back to red and stay on, indicating the reader is
again ready for the next valid credential.
The enrollment reader output will place the information from the
credential to the cursor’s location on the screen. If a non-valid
credential is presented to the enrollment reader, the red LED will not
change, and there will be no beep.
Spanish and French translations are online at www.allegion.com/us.
