13
3.9 Advanced functions
1) Function of opening one wing only with the remote transmitter.
Proceed as follows:
a) ON THE REMOTE TRANSMITTER:
- select a new key (T1, T2 or T3) different from the one used to open the two wings and code the remote transmitter with a NEW CODE (see paragraph 3.8)
b) ON THE PROGRAMMER Fig.14:
- Press the P1 key TWICE, let 1 second elapse from one pressing to the other
- Press the key of the chosen channel (T1, T2 and T3) of the remote transmitter to transmit the code to the programmer
Caution: the receiver will accept a code that allows this further function only if different from the code previously set for the basic functions and only if set on a different key.
2) Function to enable or disable the non pressure of wings, CTR42 and CTR42/S:
to disable the function:
a) press the P1 key of the programmer Fig. 14 for 1 second. The red led will go on.
b) Press the P2 key for 1 second
To enable the function repeat the procedure at points a and b
Fig.14
