Streaming port setting
Basic Setting > Network > PPPoE (dial-up networking setting)
PPPoE: Point-to-Point Protocol over Ethernet is a protocol that supports access to a high-speed
wideband network using a PC and a wideband modem (such as xDSL, Cable, Wireless modem).
The user need only to equip the PC with an Ethernet card and apply to an ISP (such as HiNet)
and an ADSL provider (such as Chunghwa Telecom) for ADSL service to roam the Internet
through ordinary twisted copper wires.
PPPoE: Point to Point Protocol over Ethernet is applicable to networking via a xDSL or cable
modem. PPPoE setting must be executed in the LAN environment for your PC to connect to
ADSL. Follow the steps below to complete the setting:
1.
Dial: You can select whether or not to dial when you boot the machine.
2.
Use DHCP or fixed IP for connection to the LAN environment.
3.
Key in the IP address of the camera and enter "PPPoE Setting" following the route
Setting
Î
Basic Setting
Î
Network
Î
PPPoE.
4.
Key in the xDSL "Username" and "Password" acquired from your ISP. Click Save to
confirm the setting.
5.
Where the ADSL modem and the camera is connected via a switch-hub, you can press
“Reboot” or restart the machine manually to try PPPoE dialing when the setting of the
54
