4.
Installing camera holder
A holder is not included in the package, please find a fit holder to install the camera.
a.
Product location: You can install the product on the holder and hang it on the wall or ceiling.
Please do not install this product in locations of poor ventilation. This will result in poor
operation.
b.
If you have an RS-485 Pan/Tilt, please connect this product to the stage from the RS-485 port.
Please make sure the poles must be correctly connected. This product supports standard
Pelco P and Pelco D protocols.
c.
This product is not waterproof. Please install the product inside a waterproof case equipped
with an arrestor when using it outdoors.
d.
If you are using a lens of a manual iris, please adjust the video focus before installing the
product on the holder.
11
