Basic Setting > IP Filter
This function filters IP addresses and is able to allow or deny visits from particular
addresses/target addresses.
IP filter setting
Basic Setting > IP Filter > General
IP Filtering: enables/disables the IP filter
Policy: allows/denies access
Basic Setting > IP Filter > Filter IP Address (Overview of the set IPs)
Add: enter the IP address you want to allow or deny the access of in the front field.
Remove: removes a set IP addresses
Remove All: removes all the set IP address
Special Attention
Setting rules:
1.
Actions that may cause a limited connection are to be denied.
2.
Improper use of this function may cause disconnection from Internet. You
might need to use hardware reset to reset to the factory default. Please
refer to the “Factory Default” for details.
66
