AlineA Ltd.
Users Manual
Page 5 of 18
200S GSM Desktop Phone
Power off
Cut off the Main power, the phone is power off and the display is cleared.
Menu
1.READ MESSAGE
4:PHONE BOOK
5.CALL DIVERT
6.KEYPAD TONES
7.RINGING TONES
9.IMEI-VERSION
BACK:BACK
Notice: In main menu, you can’t enter “SETTING” unless you input correct passwords.
Outgoing Calls
1.
Pick the handset or press " Hand Free", the screen shows " PRESS OK TO REDIAL ",
dial upon hearing the dialing tone;
PRESS OK TO REDIAL
2.
Dial: dial the called number, the number dialed is shown on the screen in turn, and
the sound for pressing key is heard. If there are any mistakes in dialing, press " Cancel" to
return and input again; Press " OK " to redial the last number;
PRESS OK TO SEND 264145
3.
After dialing, press " OK” to send, if there is no dialing for continuous 6 seconds,
and the number dialed is2 digits or is more than 2 digits, the phone will send out the
number automatically, the LCD shows number sending indication; If the number dialed is
less than 2 digits, and it continues for 6 seconds of not dialing, the call will be cut
automatically; If the number dialed is set by the operator as barred number, the LCD
shows " BARRED NO." and returns to standby status;
BARRED NO. 264145
4.
After the called party hooks off, the phone starts time calculation and billing: The
display shows the tariff ( The currency type is: Indian rupee. It is the same hereinafter)
“TARIFF XXXX.XX/XXs”, call duration " h:mm:ss" and call charge " INR:XXXXX.XX ";
TARIFF: 3.00/60S
0:00:12
INR: 3.00 26419086
In calling, press the numeral key or " * " or " # “ to output corresponding Dual Tone
Multiple Frequency (DTMF);