20
(10)
Name
Allow reset the channel name, this function is only valid in channel
mode.
(11)
TX Allow
Always: Always allow transmit
Channel Free: Allow transmit when the channel is free
Different CC: Allow transmit when receive matched signal but different
color code.
Same CC: Allow transmit when receive matched signal and same color
code.
(12)
TX Prohibit
TX ON: Will allow transmit on the current channel.
TX OFF: Will not allow transmit on the current channel.
(13)
Radio ID
In Digital channel, it will show the DMR ID which must be programmed
in the PC software – Digital – DMR ID list- DMR ID. Allows edit and
select an ID for the channel, each channel allows one ID.
In Analog channel, it will show the radio self ID which is programmed in
PC software – Analog –Analog Address Book – Number.
(14)
Color Code
The digital channel should have the same color code for communication
as defined by the repeater to be used; which can be programmed in the
PC software or defined in the Menu.
(15)
Time Slot
Set up Slot 1 or Slot 2 for the current channel.
(16)
Digi Encrypt
With the digital encryption, the communication will be confidential. A total
of 32 digital encryptions is offered, and it can be programmed in the PC
software or defined in the Menu.
(17)
RX Group List
It will allow edit the RX Group List and assign a new RX Group List to
the channel.
Select Cur List: Select the current RX Group List. Add Group: Add a TG
to the current RX Group List.
Remove Group: Remove a TG from the current RX Group List.
(18)
Work Alone
In the PC software – Public – Alarm settings – Work Alone, you have to
set up the response time, warn time and response method initially.
Turn on the work alone function for the current channel. When the
radios predetermined time has been reached for the alone working time,
the radio will beep a sound and show “Work Alone Predict”. The user
has to confirm by pushing the programmed work alone key to confirm
continuing work alone, otherwise, the radio will start its alarm and send
the alarm on the channel when reaching its preset response time
(19)
CH Ranging
In standby, if the call contact type for a channel is "Private call", The radio
will automatically start ranging function when turned to this channel. The
other radio's location will be showed on screen at intervals.
(20)
GPS Receive
Turn on GPS Coordinates, if both radio GPS is positioned, the radio will
display the other radio's distance and position when radio is receiving.
(21)
DMR Mode
Simplex: Enable to communicate by repeater frequencies directly with
another radio with opposite TX/RX frequncies.
Repeater: Enable talk with other radio by repeat frequency throught
repeaters.
Double Slot: When TX/RX frequency is same, turn on this function to
communicate by the slot set in simplex mode.
Note:
If DMR mode not choosed Doube Slot, the radio will work on Slot
in repeat mode. if choose Double Slot, it is necessary to Double choose
a slot by time slot setting.
7
MAIN MENU FUNCTIONS
