manualshive.com logo in svg

Alinco DJ-V57, Instruction Manual

Share
Download
Alinco DJ-V57 Instruction Manual Download Page 62

10.Maintenance and Reference

10

62

Specifications

*The charging time may vary depending on the condition of the battery pack and the

temperature of the environment.

Charging with the EDC-144 (Quick Charger)

Please make sure that following items are included in the package

• EDC-144A:

EDC-144 basket, EDC-112 adapter (AC 120V), insulation sheet

• EDC-144E:

EDC-144 basket, EDC-151 adapter (AC 240V), insulation sheet

• EDC-144UK: EDC-144 basket, EDC-152 adapter (AC 240V), insulation sheet

• EDC-144R:

EDC-144 basket, connection cable, insulation sheet, 2 screws,

connective stay

1. Connect the AC adapter plug to the DC-IN jack on

the back of the basket.

*The design of the AC adapter may vary

depending on the models.

2. Connect the adapter to an outlet.

AC adapter plug

Basket

AC adapter*

■

NOTE:

Refer to page 64 for information about how to charge the battery using
addtional baskets.

Caution

Before using them for the first time, attach the insulation sheet to cover the

screw-terminals to avoid short-circuiting.  Please refer to page 65 for instruction.

Summary of Contents for DJ-V57









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands