4.Basic Operation
4
29
4.6.4 Quick Program Memory Channel(s)
This function is to quickly write in the memory.
1. Select a frequency and operating parameters to be programmed in the VFO mode.
2. Press the
key for more than 2 seconds.
3. The memory number blinks and a beep sounds.
4.6.5 Transmitter Detecting Function
This is a function that receives a particular frequency and indicates the relative
distance to the transmitter by the strength of the detected signal. As the transmitted
signal gets stronger, a beep will sound in shorter intervals (the sound heard correlates
to S-meter signal strength). Use this function for fox hunting.
1. Select a frequency and operating parameters to be programmed in the VFO mode.
Programmable parameters are explained later. Press the
key. "
" appears
on the display.
2. Press the FUNC key to display
.
3. Rotate the dial to select the memory channel number d0 ~ d9.
4. By pressing the
key again while
is on the display, a beep sounds and
programming is completed.
5. Pressing the FUNC then
key while
is displayed on the programmed
channel will delete the memory data and it becomes available for reprogramming.
6. To exit from this function, move any normal memory channel or select VFO mode.
7. To activate this function, select d0 ~ d9 channels in the memory mode.
When using this function, received signals can’t be heard.
When this function is selected, the detecting tone will automatically start to sound.
However, When the tone squelch and/or the DCS are set, the detecting tone will sound
only when the tone squelch frequency or DCS codes correspond.
• When the transmitter is at close range or when the transmitter signal is strong, use
the Attenuator function.
• You can hear the received signal by pressing the MONl key (the receive indicator
will light at this time). When a microphone is attached to the transmitter, you can
hear sounds around the transmitter by pressing the MONl key.
NOTE:
This function can't be used if all memory channels are already programmed.
Summary of Contents for DJ-V57
Page 69: ...The following table lists available characters ...
Page 70: ...Memory Mode Structure ...
Page 71: ......
