Alinco DJ-MX1, Instruction Manual

Page: 40 / 48

Marine Transceiver
26
• • FUNCTION MENU SETUP FUNCTION MENU SETUP
siganl is received in off interval. BS doesn’t work while scanning, and resumes when 5 seconds are
elapsed from the last transmission.
11. Squelch Sensitivity
Select ON to improve noise rejection so that the squelch is less aff ected by noise. However weaker
signals may also be rejected and can’t open squelch.
12. All Channel Low Power
Select ON to set output power of all channels except CH16 to low 1W.
This is another battery saving feature.
15. LED Flashing Function
A LED fl ashes at a transperent section on the bottom of the radio while fl oating in the water.
Like a fl ashing fi shing fl oat, it catchs eyes in the dark and you can pick the radio out of water easily.
Select ON to activate. This function is valid even when the radio is turned off .
The fl ashing light turns off automatically when it is retrieved from the water and becomes dry.
The LED may fl ash when the radio is wet by rain or splashing water but this is not a defect.
It consumes battery so it is recommended that you wipe the water off to dry the rear surface of the
radio with clean dry cloth.
NOTE: Menu 13 and 14 are ATIS (The Automatic Transmitter Identification System) related and
made available after dealer programming to certain areas of distribution. You may not even see these
menu in the set mode depending on your dealer programming. At any case the function is disregarded
regardless of On/Off setting without dealer preprogramming. The manufacturer does not disclose such
programming software to public. Please contact your dealer for details of programming. NOTE: Menu 13 and 14 are ATIS (The Automatic Transmitter Identification System) related and
made available after dealer programming to certain areas of distribution. You may not even see these
menu in the set mode depending on your dealer programming. At any case the function is disregarded
regardless of On/Off setting without dealer preprogramming. The manufacturer does not disclose such
programming software to public. Please contact your dealer for details of programming.