Marine Transceiver
8
•
• PREPARATION
PREPARATION
Installing / Removing the Belt Clip
■
Installing the Belt Clip:
Place the belt clip to the grooves on the back
of the radio, and then fi x it by provided screws.
(screws size 3mm x 4mm).
■
Removing the Belt Clip:
When removing, loose the two screws on the
belt clip and remove the belt clip.
Never use screws of incorrect size.
Installing Optional Microphones
Unveil the MIC-SP jack cover and then insert the Microphone plug into MIC-SP jack.
NOTE:
1. To keep the radio water resistant, the accessory port must be closed properly with the original sup-
plied cover.
2. Use genuine, specifi ed Alinco microphone accessories for water-tight operations. The earphone mi-
crophone unit is not waterproof and components such as PTT key / microphone gain switch etc may
risk water damage.
NOTE:
1. To keep the radio water resistant, the accessory port must be closed properly with the original sup-
plied cover.
2. Use genuine, specifi ed Alinco microphone accessories for water-tight operations. The earphone mi-
crophone unit is not waterproof and components such as PTT key / microphone gain switch etc may
risk water damage.
Summary of Contents for DJ-MX1
Page 2: ......
Page 43: ...Marine Transceiver 29 VHF MARINE CHANNEL LIST VHF MARINE CHANNEL LIST...
Page 46: ...MEMO...
Page 47: ......