18
Frequency/Channel Scan
Under corresponding mode, press
A
FUN
key, the top left corner of LCD displays " " icon, then press
5
SCAN
key to
start frequency scan or channel scan.
1. Frequency Scan
Under VFO mode, frequency scan is available. This function is used for monitoring signal
of various communication frequency by transceiver ‘step’ setup, press numeric key or
D
ESC/M
key to exit.
2. Channel Scan
Under channel mode, this function is used for monitoring signal of each channel in this
mode. Press numeric key or
D
ESC/M
key to exit.
▼
▼
▼
NOTE:
Frequency scan is of all bands scan, it scans upwards as your STEPPING setting.
In channel scan, the skipped channel is not in the line of scanning. Scan upwards as per channel no.
(please refer to channel scan skip).
Frequency/channel scan can change scan direction by press
B
/
C
, when find a matching carrier wave and
signaling, the transceiver will stay 5 seconds then go on scanning. (Please refer to scan setup)
Channel Scan Skip
Under channel mode, press
A
FUN
key, the top left corner of LCD displays " " icon, then press
6
SKIP
key to set the
current channel as Channel scan skip. Repeat above operation to cancel channel scan skip.
1. LCD displayed "
S
" means the current channel will not be scanned.
2. "
S
" icon disappeared means the current channel will be scanned.
BASIC OPERATIONS
