7
S
P
/
M
IC
PREPARATION
MIC
Installing / Removing the Belt Clip
■
Installing the Belt Clip:
Place the belt clip to the grooves on the back of the
transceiver, and then fix it by provided screws.
■
Removing the Belt Clip:
Installing optional microphones
Unveil the MIC-SP jack cover and then insert the Microphone
plug into MIC-SP jack.
NOTE:
To keep the radio dust and splash resistant, the cover must
1.
be closed properly with the original supplied cover.
The radio is not dust and splash resistant while using the
2.
optional accessory risking that the water may penetrate
inside through the plug.
Check the tightness of the fixing screws from time to time.
(screws siz 2.5 x 5mm).
