12
BASIC OPERATIONS
Switch between Channel mode and VFO mode
Under standby state, press
D
ESC/M
key to set main band as Channel mode or frequency
mode(VFO).
Frequency Adjusting
When transceiver in VFO mode or FM radio frequency mode, rotate
B
/
C
to adjust frequency or input
frequency by keypad.
1.Press
B
to increase frequency, Press
C
to decrease frequency. Every rotate can add or reduce one
stepping value.
Channel Adjusting
When transceiver in Channel mode or FM radio channel mode, rotate
1.
B
/
C
to adjust channel.
Press
B
to enter the downward channel, Press
C
to enter the upward channel. If there is blank
channel between two channels, radio will skip blank channel into next channel.
Input channel number by keypad
2.
When transceiver in Channel mode or FM radio channel mode, user can input number(000-199) to
switch into desired channel. If input channel number is not belong to unprogrammed channel, radio
will emit wrong prompt voice to return current channel. 001 means channel 1,030 is channel 30, 125
is channel 125.
NOTE: Channel step:2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K and 50KHz in total 9 for optional. FM
radio step frequency is 50K.