Alimak ALC II, User Manual

Page: 56 / 62

Operation
Displayer:
Above the keypad there are two 2-digit displays. The left one
always shows the actual landing. Its also shows if the hoist is
above, below or inside the landing zone.
If the left display shows:
this means that the hoist is inside landing 5.
The right display shows what landing the hoist will stop next,
but also shows the destination values that are put into the system
and information/fault indications.
It also shows the travel direction of the hoist in the shape of two
red dots, continuously going upwards or downwards depending
on the direction.
Destination, with keypad:
A destination order is placed in the following manner:
The hoist is located on the 4th landing and the displays show:
Landing 8 is desired, press key 8 and the displays show:
Confirm choice by pressing the ENT key and the displays show:
and the hoist starts to move up.
Additional destinations can be added in a similar manner:
In addition the Stop Next Landing key can be pressed in order
to stop at the next landing. For example: the hoist is going
upwards to landing 8 just passing landing 5 and a stop at landing
6 is desired.
The display shows:
Press the Stop Next Landing key and the display shows:
The hoist will now first stop at landing 6 and then on landing 8.
ALIMAK 34845 - 1 /01
A
50