background image

8

  |  Before 

You 

Begin

Safety Instructions

Use the following safety guidelines to help protect your computer from potential damage 
and to help ensure your personal safety.

 

WARNING:  

Before you begin, read the safety information that 

shipped with your computer. For more safety best practices 
information, see the Regulatory Compliance Homepage at 

 

dell.com/regulatory_compliance.

 

WARNING:  

Only a certified service technician is authorized to 

remove the computer cover and access any of the components 
inside.

 

CAUTION: 

To avoid damaging the computer, ensure that the work 

surface is flat and clean.

 

CAUTION: 

When you disconnect a cable, pull on its connector or on 

its pull-tab, not on the cable itself. Some cables have connectors with 
locking tabs or thumb-screws that you must disengage before 
disconnecting the cable. When disconnecting cables, keep them 
evenly aligned to avoid bending any connector pins. When 
connecting cables, ensure that the connectors and ports are 
correctly oriented and aligned.

 

CAUTION: 

To disconnect a network cable, first unplug the cable from 

your computer and then unplug the cable from the network device.

 

NOTE: 

Ensure that you remove the security cable from the security-cable slot, 

if applicable.

book.book  Page 8  Monday, November 18, 2013  3:50 PM

Summary of Contents for X51 R2



















Reviews: