54
| Removing
the
Status-Light
Board
Removing the Status-Light
Board
WARNING:
Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove the battery pack. See "Removing the Battery Pack" on page 12.
2
Remove the base cover. See "Removing the Base Cover" on page 14.
3
Remove the center control cover. See "Removing the Center Control Cover" on page 26.
4
Remove the keyboard. See "Removing the Keyboard" on page 32.
5
Remove the macro keyboard. See "Removing the Macro Keyboard" on page 36.
6
Remove the display assembly. See “Removing the Display Assembly” on page 43.
7
Follow the instructions from step 1 to step 7 in Removing the Palm Rest.
Procedure
1
Note the routing of status-light board cable and remove the cable from the routing
guides.
1
status-light board cable routing
2
status-light board
27
1
2
Book.book Page 54 Thursday, April 19, 2012 2:38 PM
