Setting up the monitor | 37
Inserting the batteries into the remote control
The remote control is powered by two 1.5V AAA batteries.
To install or replace batteries:
1.
Remove the battery cover by lifting the bottom edge of the remote
control.
2.
Align the batteries according to the (+) and (–) indications inside the
battery compartment.
3.
Replace the battery cover.
CAUTION: The incorrect use of batteries can result in leaks or bursting.
Be sure to follow these instructions:
• Place “AAA” batteries matching the (+) and (–) signs on each battery to
the (+) and (–) signs of the battery compartment.
• Do not mix battery types.
• Do not combine a new battery with the used one. It causes shorter life or
leakage of batteries.
• Remove the dead batteries immediately to prevent them from liquid
leaking in the battery compartment. Do not touch exposed battery acid, as
it can damage your skin.
NOTE: If you do not intend to use the remote control for a long period,
remove the batteries.
9
Mute
To turn off the volume.
10
Preset Modes
To specify a desired color mode from a preset list. For
11
Exit
To exit the OSD main menu.
12
+
To increase the adjustment levels.
13
To increase the volume level.
