46 | Operating the monitor
OSD warning message
When the monitor does not support a particular resolution mode, you will see the
following message:
NOTE: The message may be slightly different according to the connected
input signal.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
for the Horizontal and Vertical
frequency ranges addressable by this monitor. Recommended mode is 1920 x
1080.
You will see the following message before the
DDC/CI
function is disabled:
Firmware
Displays the firmware version of your monitor.
Service Tag
Displays the service tag of your monitor. This string is required
when you look for phone support, check your warranty status,
update drivers on Dell's website, etc.
Reset Others
Resets all settings under the
Others
menu to the factory
defaults.
Factory Reset
Resets all OSD settings to the factory defaults.
