manualshive.com logo in svg

Alien MAX316, User Manual

Share
Download
Alien MAX316 User Manual Download Page 127

ALIEN MEGA/MAX USER MANUAL 

 

127 

 

Figure 9.2.5.4    UPnP Settings Finished-Manual 

 

9.2.6 

Configuring More Settings   

Steps: 

1.

 

Enter the Network Settings interface. 

Menu > Setup > Network   

2.

 

Select the 

More Settings 

tab to enter the More Settings interface. 

 

 

 

Figure    9.2.6.1    More Settings Interface 

 

3.

 

Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.   

 

Alarm Host IP/Port

: With a remote alarm host configured, the device will 

send the alarm event or exception message to the host when an alarm is 
triggered. 

This option is currently under development.

 

 

 

Alarm Host IP

 refers to the IP address of the remote PC on which the Client 

software is installed and the 

Alarm Host Port 

must be the same as the alarm 

monitoring port configured in the software (default port is 7200). 

This option is currently under development.

 

 

 

Multicast IP

: The multicast option can be configured to view more than the 

maximum number of cameras through the network. A multicast address 
spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is 
recommended to use the IP address ranging from 239.252.0.0 to 
239.255.255.255. When adding a device to the Client software, the multicast 
address must be the same as the device’s multicast IP. 

Summary of Contents for MAX316



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands