manualshive.com logo in svg

Alien Technology ALR-8780, Interface Manual, Page: 26 / 104

Share
Download
Alien Technology ALR-8780 Interface Manual Download Page 26

R

EADER 

F

UNDAMENTALS

 

C

HAPTER 

2 

 

 

R

EADER 

I

NTERFACE 

G

UIDE

 

 

D

OC

. C

ONTROL  

# 8101938-000 R

EV 

05  

18

NotifyTrigger 

The NotifyTrigger command specifies a condition that must occur before a 
TagList is sent out to a listener. There are a number of possible triggers that 
can be used: 

 

Trigger 

Trigger Condition 

Tag Data Included 

Add 

A new tag was read and added to the TagList. 

Only the added tags. 

Remove 

A tag was removed from the TagList. 

Only the removed tags. 

Change 

A tag was either added to, or removed from, 
the TagList. 

Entire TagList. 

True 

The evaluation task of the autonomous state 
loop evaluates to 

true

 

(typically when a tag is added to the TagList). 

Entire TagList. 

False 

the evaluation task of the autonomous state 
loop evaluates to 

false

 

(typically when no tag is added to the TagList) 

Entire TagList. 

TrueFalse 

the evaluation task of the autonomous state 
loop evaluates to 

true

 or 

false

 

(i.e. every autonomous mode cycle) 

Entire TagList. 

 

NotifyAddress 

You must tell the reader where to send notification messages when it is operating 
in Autonomous Mode.  
 
The reader can be instructed to send messages to a specific machine on the 
network, or via email to a specific email address. This is configured using the 
command: 
 

set NotifyAddress = <address> 

 
The format of <address> indicates the method of delivery: 
 

NotifyAddress 

Description 

hostname:port 

Send a message to a specified port on a networked machine. 
The address takes the form “hostname:port.” For example, 
“123.01.02.98:3450” or "listener.alientechnology.com:10002” 

[email protected] 
 

Send a message via e-mail to the address specified. The 
address is specified in standard email form, i.e., 

[email protected]

 

NOTE: the MailServer parameter must be configured for this 
to work. 

serial 

Send a message to the serial connection. The word “serial” is 
used as the address, and is not case sensitive. 

 

NotifyFormat 

You can tell the reader the format for any notification that it issues. When a 
notification message is sent out, it contains two parts: 
 

Summary of Contents for ALR-8780









































































































Reviews:

No comments