Alien Aircraft Corp C-310-B, Assembly Instructions Manual, Page: 18 / 42

57...Sand the fuselage sides, bottom and top smooth from F-4 / F-28
back to the tail. Round off the bottom corners of the fuselage from the
wing opening to the tail.
58...Glue part F-36 to the bottom of F-35. Trim and position it so it is
slightly back from the outside edge of F-35 to create a step that the
windshield will fit into.
Glue parts F-37 onto the front of F-28. Trim and fit them so that they
are in slightly from the outside edge of the fuselage sides to create a
step for the windshield to fit in.
Test fit the side windows and the windshield. The side windows
should fit into F-27A’s and rest against the F-27B’s.
Trim the fuselage / windshield until you get a good fit.
Building the Nacelles:
NOTE: The nacelles are identical. The letters “L” and “R” are
marked on the nacelle sides. Each nacelle has one “L” and one “R”
59...Press four 4-40 blind nuts into the back of N-2. Secure each with
a small drop of thin C/A glue.
60...Cut two pieces of 1/4” triangle 3 1/2” long and two pieces of 1/4”
triangle 8 1/2” long from one of the 24” long 1/4” triangle strips.
Glue the 3 1/2” pieces to the bottom edges of one pair of F-1L and F-
1R. Be sure the triangle is on the inside face of the nacelle sides.
Trim the triangle from the wing opening as shown.
Page 18