1
3
4.
Put wiring cover back and then tighten the screw.
5.
Close the panel.
Installation of indoor unit
Note:
●
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
● For the air conditioner without plug, an circuit break must be installed in the line.
The circuit break should be all-pole parting and the contact parting distance
should be more than
1/8in(
3mm
)
.
3. Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
blue
brown
black
yellow-green
power connection
wire
cable-cross
hole
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
Wiring Cover
09
、
12K:
(230V)
,(115V)
N(1) 2
Outdoor unit connection
N(1) 2
3
L1
L2
G
3
1
8
K
24K
:
(230V)
Notice before installation
1. How to install the over line pipe
(According to the direction as show.)
wire pipe
Fixed nut
Screw
2
. Finish (According to the
direction as show in right figure.)
GND
GND
2
3
N(1)
2
3
N(1)
L
N
Outdoor unit connection
GND
GND
GND