52
SECTION 5: OSD MENU REFERENCE
2.
Click
IRIS+
to edit the status of the auxiliary outputs. You can set the alarm output type as OPEN (normally open) and CLOSE
(normally closed).
3.
Move the cursor to
DWELL TIME
to set the duration of the auxiliary output signal. The configurable rage is 0~60 seconds.
4.
Link the auxiliary output to the configured alarm.
a.
Open
MAIN MENUS
g
DOME SETTINGS
g
ALARMS
g
ALARM SETTING
, then choose the alarm number that
you want to link the auxiliary output to.
b.
Move the cursor to
AUX
, then click
IRIS+
to configure the auxiliary output to the alarm. You can choose NONE to
disable auxiliary alarm outputs, choose 1 to activate AUX 1, or choose 2 to activate AUX 2.
5.3.4 CAMERA PARAMETER submenus
The CAMERA PARAMETER submenu include five pages, each with no additional submenu. To open the CAMERA PARAMETERS
submenus:
1.
Position the marker on the CAMERA PARAMETERS line, and then click the
u
button in the PTZ control panel repeatedly to
open the different displays. To return to the first CAMERA PARAMETERS display, click the
t
button repeatedly. CAMERA
PARAMETERS displays are shown below.
Camera Parameters page 1
Camera Parameters page 2
