48
SECTION 5: OSD MENU REFERENCE
5.2 SYS INFO submenu
System information menu displays the current system information of the camera including the camera address, communication
parameters, and other parameters. In the SYS INFO displays, these parameters are not changeable, and it is similar to the system
information shown when camera is powered on. To open the SYS INFO display:
1.
Go to
MAIN MENUS
g
SYS INFO
. A display similar to that shown below on the left will open.
SYS INFO display pg 1
SYS INFO display pg 2
The settings shown on the SYS INFO display are in common formats:
—
The BUILD DATE is in the format “YY MM DD”.
—
COM FORM (RS-485 communications settings) are in the format “baud rate, data bits, stop bits”.
—
Temperature is shown in Celsius.
2.
To view the second SYS INFO display, click the
u
button in the PTZ control panel. To return to the first SYS INFO display, click
the
t
button.
3.
Other OSD menu control options:
—
To close the OSD menu, use the
p
and
q
buttons to move the position icon to
EXIT
, and then click
Iris+
.
—
To move to the previous menu, use the
p
and
q
buttons to move the position icon to
BACK
, and then click
Iris+
.
5.3 DOME SETTINGS submenus
The DOME SETTINGS submenus contain all parameters used to configure the camera. DOME SETTINGS submenu contains two
pages. You can change from one page to the
u
and the
t
buttons.
1.
Use the
p
and
q
buttons to move the position icon to
DOME SETTINGS
. The display shown below on the left will appear.
