10
www.observint.com
© 2018 Observint Technologies. All rights reserved.
Specifications
Camera
Image Sensor
1/1.8" Progressive Scan CMOS
Min. Illumination
Color: 0.002 Lux @ (F1.2, AGC ON), 0.0027 Lux @ (F1.4, AGC ON), 0 Lux with IR
Shutter Speed
1 s to 1/100,000 s, supports slow shutter
Lens
8 mm to 32 mm, F1.6, horizontal field of view: 42° to 13.5°
Auto-iris
DC drive
Day & Night
IR cut filter with auto switch
Digital Noise Reduction
3D DNR
WDR
120dB
Compression Standard
Video Compression
Main stream: H.264 / MPEG4
Sub stream: H.264 / MPEG4 / MJPEG
Third stream: H.264 / MPEG4 / MJPEG
H.264 Type
Baseline Profile / Main Profile / High Profile
H.264+
Supported
Video Bit Rate
32 Kbps ~ 16 Mbps
Audio Compression (-S)
G.711 / G.722.1 / G.726 / MP2L2
Audio Bit Rate (-S)
64 Kbps (G.711) / 16 Kbps (G.722.1) / 16 Kbps (G.726) / 32-160 Kbps (MP2L2)
Image
Max. Resolution
1920 × 1080
Main Stream Max. Frame Rate
50 Hz: 50 fps (1920 × 1080, 1280 × 960, 1280 × 720)
60 Hz: 60 fps (1920 × 1080, 1280 × 960, 1280 × 720)
Sub Stream Max. Frame Rate
50 Hz: 25 fps (704 × 576, 640 × 480, 352 × 288)
60 Hz: 30 fps (704 × 480, 640 × 480, 352 × 240)
Third Stream Max. Frame Rate
50 Hz: 25 fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 576, 640 × 480,
352 × 288)
60 Hz: 30 fps (1920 × 1080, 1280 × 960, 1280 × 720, 704 × 480, 640 × 480,
352 × 240)
Image Enhancement
BLC / 3D DNR / Defog / EIS
Image Setting
Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or
web browser
Region of Interest
Supports 4 fixed region for each stream, and dynamic tracking
Target Cropping
Supported
Day / Night Switch
Auto / Schedule / Triggered by Alarm In (-S)
Picture Overlay
LOGO picture can be overlaid on video with 128 × 128 24-bit bmp format
Accuracy
Capture Rate: > 99%
Recognition Rate: > 98%
Vehicle Speed
Support vehicle speed under 120 km / h (74.6 mi/h)
Line number
Up to 4 lines supported. Recommended to set 1 or 2 lines for best performance
Direction
Support capture and recognition of vehicles both approaching and leaving
White list and Black list
Up to 2048
Network
Network Storage
Support microSD / SDHC / SDXC card (128G), local storage and NAS (NFS,SMB / CIFS), ANR
Alarm Trigger
Road traffic, motion detection, video tampering alarm, network disconnected, IP address
conflict, illegal login, HDD full, HDD error
Protocols
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP,
SNMP, IGMP, 802.1X, QoS, IPv6
General Function
One-key reset, anti-flicker, three streams, heartbeat, password protection, privacy mask,
watermark, IP address filter, mirror
Standard
ONVIF (profile S, profile G), ISAPI
Interface
Communication Interface
1 RJ45 10M / 100M Ethernet port
Audio
With –S model: 1 audio input(line in / mic in), 1 audio output
Alarm
With –S model: 1 input, 1 output
Video Output
1Vp-p composite output (75 Ω / BNC)
On-board storage
Built-in microSD / SDHC / SDXC slot, up to 128GB
Reset Button
Yes
Audio
Environment Noise Filtering
Supported
Audio I/O
Supported
Audio Sampling Rate
16 kHz / 32 kHz / 44.1 kHz / 48 kHz
General
Operating Conditions
-30 °C to +60 °C (-22 °F to +140 °F), Humidity 95% or less (non-condensing)
Power Supply
12 Vdc ± 10%, terminal block PoE (802.3at, class 4)
Power Consumption and
Current
12 Vdc, max. 18.1 W, 1.6 A; PoE, max. 24 W, 0.4 A to 0.6 A
IR
850 nm IR wavelength, up to 50 meters for 2.8 to 12 mm lens, up to 100 m for 8 to 32 mm lens
White Light
-Up to 50 meters for 2.8 to 12 mm lens, up to 100 m for 8 to 32 mm lens
Protection
IP67
Dimensions
13.72
”
× 4.5
”
× 4.4
”
(348.38 × 114.18 × 111.73 mm)
Weight
Approx. 4.57 lb. (2075 g)
Supplied Accessories
Quick Installation Guide
Mounting Hardware and Template
Junction box
Gang box adapter plate
Using the Waterproof Ethernet Fitting
Install the
Waterproof Ethernet Fitting
on the Ethernet cable end at the camera when moisture or
contamination exists in the area near the camera. The fitting includes several parts that must be installed in
a specific order. To install the fitting:
1.
Place the rubber O-ring over the camera drop cable end cap.
Push the O-ring up to the connector cap.
2.
Place the Lock Nut onto the network cable from the router
or switch as shown in the drawing to the right. The inside
threads must be toward the camera end.
3.
Place the rubber basket onto the network cable above the lock
nut as shown.
4.
Place the end cap onto the network cable above the rubber
gasket as shown. The fingered end must be toward the router
or switch.
5.
Install an RJ-45 connector onto the network cable.
6.
Plug the RJ-45 connector with the network cable into the
camera network drop cable.
7.
Fit the end cap on the network cable onto the camera drop
cable end cap. Rotate the network cable end cap to lock it in
place.
8.
Push the rubber gasket fully into the end of the network cable
end cap.
9.
Screw the lock nut onto the network cable end cap until it is
fully seated.
Network drop cable
from camera
Network cable from
router or switch
Ethernet Fitting installed
Ethernet Fitting assembled and connected
Drop cable
end cap
Network drop
cable from
camera
Rubber
O-ring
seal
RJ-45
connector
End cap
Rubber
gasket
Network
cable
from
router or
switch
Lock nut
