manualshive.com logo in svg

ALIBI ALI-DVR3004H, User Manual

Share
Download
ALIBI ALI-DVR3004H User Manual Download Page 32

24

2.7.3  Configuring the HDD

By default, all cameras will record to the one partition of the internal HDD. If multiple disks (internal HDD and network drives) are 
installed, individual cameras or groups of cameras can be configured to save their recordings to assigned areas on those drives.

Before you start:

1.  Make sure that an HDD is installed. If not, install a HDD and initialize it. Go to 

Menu | HDD | General

.

2.  Click 

Advanced

 to check the storage mode of the HDD. 

a.  If the HDD mode is Quota, set the maximum record capacity. See “2.7.4 Configuring HDD Group mode” on page 24 for 

more information. 

b.  If the HDD mode is Group, setup the HDD group. 

2.7.4  Configuring HDD Group mode

Each camera can be configured with an allocated quota for the storage of recorded files. After making configuration changes to the 
Storage Mode menu (see below), the DVR must be restarted for new settings to be applied. 

SECTION 2: INSTALLING THE SYSTEM

Summary of Contents for ALI-DVR3004H




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands