Alibaba Cloud SAG-1000, Configuration Manual

Page: 16 / 23

Smart Access Gateway SAG-1000 Configuration Guide / 3 Web configuration
Ensure that the IP address is in the administrator CIDR block of the gateway
device (the default administrator CIDR block is 192.168.0.0/24) and does not
conflict with other IP addresses. For example, 192.168.0.99. You do not need to
configure the router and DNS.
3.2 Step 2: Set the password when you log on for the first time
When you log on to the Web console for the first time after powering on the Smart
Access Gateway, you must set the logon password of the Web console.
Prerequisites
Before logging on to the web configuration page, make sure that:
• The Smart Access Gateway has been started.
• The local client is already configured with a static IP. For more information, see
Step 1: Configure the local client .
• The local PC is connected to Port 2 of the Smart Access Gateway through a network
cable.
Procedure
1. Enter 192 . 168 . 0 . 1 in your browser.
192 . 168 . 0 . 1 is the default web configuration address of the gateway
device.
2. Enter a logon password.
Keep your logon password securely. If you forget the password, press the reset
button once within 10 seconds to reset the password.
Notice:
If you press the reset button at least three times within 10 seconds, all
configurations will be cleared.
3. Log on to the web configuration page.
8 Issue: 20190228