Alibaba Cloud SAG-1000, Configuration Manual

Page: 15 / 23

Smart Access Gateway SAG-1000 Configuration Guide / 3 Web configuration
3 Web configuration
3.1 Step 1: Configure the local client
Before performing web configurations on the SAG-100, you must configure the static
IP address of the local client to access the web configurations.
Windows client configuration
To configure a static IP for a Windows client, follow these steps:
1. Right-click the network connection icon in the lower right corner, then click Open
the Network and Sharing Center.
2. In the left-side panel, click Change Adapter Configurations.
3. Right-click the connected network and then click Properties.
4. Double-click the Internet Protocol Version 4 (TCP/IPv4) option.
5. Select the Use the following IP addresses option and enter the static IP address and
subnet mask to use.
Notice:
Ensure that the IP address is in the administration CIDR block of the gateway
device (the default administration CIDR block is 192.168.0.0/24) and does not
conflict with other IP addresses. For example, 192.168.0.99. You do not need to
configure the gateway and DNS.
6. Click OK.
Mac client configuration
To configure a static IP for a Mac client, follow these steps:
1. On the desktop, click the System Preferences icon, and then click Network in the
Internet and Wi-Fi option. Open Network and Sharing Center.
2. Click the connected network and then click Advanced.
3. On the Ethernet configuration page, click the TCP/IP tab page.
4. In the Configure IPv4 option, select Manual, and enter the static IP and subnet
mask to use.
Notice:
Issue: 20190228 7