ALI Champion CH-44 Installation/Operation Manual With Service Replacement Parts Download Page 20

Page: 20 / 104

1. Upper Wash Arm

Rear Guide Pin

The rear guide pin is

attached to the rear of

the upper wash arm. It

mates with the upper

wash arm rear support.

2. Connection Flange Pins

The connection flange

pins are welded to the

sides of the upper wash

arm. These pins mate

with two slots in the

connection flange to

hold the wash arm in

place when installed.

3. Upper Wash Arm

Front Guide Pin

The front guide pin is

attached to the front

of the upper wash arm.

It mates with the front

supports.

4. Front Supports

There are two fronts

supports which hold

the front of the upper

wash arm in place when

the wash arm is installed.

Installing the Upper Spray Arm Assembly (continued)

Installation

Upper Wash Arm

Front Supports

Upper Wash Arm Front

Guide Pin

Upper Wash Arm

Rear Guide Pin

Connection

Flange Pin

Connection

Flange Pin

Rear Support

The upper wash arm is shown with the rear guide pin placed on the rear support

before sliding the upper wash arm into position.

The upper wash arm is shown with the front guide pin resting in the front supports.

Summary of Contents for Champion CH-44









































































































Search results

Summary of Contents for Champion CH-44

Reviews:

Related manuals for Champion CH-44

Brands by name

Popular brands

ALI Champion CH-44, Installation/Operation Manual With Service Replacement Parts

Search results

Summary of Contents for Champion CH-44

Reviews:

Related manuals for Champion CH-44

Brands by name

Popular brands