Document 90-00066
Algo Communication Products Ltd
(604) 454-3792
2014-02-20
4500 Beedie St Burnaby BC Canada V5J 5L2
Page 23
www.algosolutions.com
DHCP Timeout
Length of time (in seconds)
following a request from the 8128 Strobe
to the DHCP server that the Strobe
will wait before assuming the
server is not available. After such time, the 8128 Strobe will use its
default address of 192.168.1.111
.
Default time is 60 seconds.
Advanced Settings - Administration
Password
Password to log into the 8128 Strobe web interface. You should
change the default password in order to secure the device on the
network. If you have forgotten your password, you will need to
perform a soft reset in order to restore the password (as well as all
other settings) back to the original factory default conditions.
