Document 90-00066
Algo Communication Products Ltd
(604) 454-3792
2014-02-20
4500 Beedie St Burnaby BC Canada V5J 5L2
Page 17
www.algosolutions.com
Send Flash Pattern
Enabling this option means all 8128 Strobes in the multicast zone will
mimic the flash pattern of the multicast master 8128 Strobe
regardless of their individual settings. If disabled then each
Strobe may have a unique flash pattern according to its settings.
Send 8180-Compatible Control Signal
This option allows the 8128 Strobe to activate Algo 8180 Audio
Alerters via multicast.
Zone Definitions
Multicast IP addresses and ports are configured by default. These
typically do not need to be changed unless they conflict with other
multicast addresses on the network. If changed they must be
changed on all 8128 Strobes in the multicast group.
Multicast zones are assigned a priority based on the list position.
Each 8128 Strobe multicast slave will flash from the highest priority
active zone.
Synchronization
For flash patterns other than "steady" multiple 8128 Strobes
activated by m
ulticast will be synchronized only if the
Cadence
option
is chosen to NOT be continuous under the
Basic Settings
tab.
