background image

 

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Warranty Terms 

1- Warranty term 
-

 

This warranty is granted by ALGcom and it is valid for a period of one (1) year from the date of purchase of the sales 

invoice. 
 
-

 

For further information about Warranty terms and expiration date, contact  us by e-mail: [email protected]

informing the model, serial number or batch number, manufacturing date and purchase invoice number. 
 
-

  

Please note that the Warranty will only be valid upon presentation of the purchase invoice.

 

 
 
2 - Warranty conditions 
-  It is the responsibility of the person installing the electronic device/piece of equipment to comply with the 
company’s regulations, as well as to follow the installation instructions contained in this manual. 
 
- Use only components and fasteners provided by ALGcom in the assembly kit.  
 
- Maintenance should be performed by authorized and trained personnel to minimize hazards to you and to others. 
 
- Perform at least one annual inspection to verify the condition of the electronic device/piece of equipment. 
 
 
3 - Warranty Exclusions 
-  The warranty will not cover, and it is the sole responsibility of the buyer, any damages caused by: violation, 
modification, change of components, adjustment or repair done by unauthorized personnel. 
 
- Damage of the product because of improper installation and use that do not follow the conditions established in 
this manual. 
 
 - Natural wear and tear caused by regular use, especially of parts such as connectors, power cord, fans, varistors or 
any other parts that characterize wear and tear. 
 
- Damage caused by nature's phenomenon (rain, humidity, wind, solar rays, electric discharges, etc.). 
 
- Damage caused by risks associated with improper grounding. 
 
- Reversing the battery bank can cause damage and it is not covered by this Warranty. 
 
- Any other malfunction that is not a manufacturing defect. 
 
 

4 – Recommendations 
- Please, read carefully the installation and operating instructions contained in this manual before starting/turning 
on the product. 
 
- Make sure that the supply voltage is according to what is recommended in this manual. 
 
 - Keep the product away from rain, humidity, wind, sun, etc. 

 

Summary of Contents for FN-4800-10-SNMP

















Reviews: